收藏本站
dsPICDEM? 1.1 Plus Development Board User’s Guide
FIGURE 5-2:
DEVICE PLUG-IN MODULE
Match the Pin 1 index marker of the
device to the lower left 45° corner of
the 80-pin QFP footprint (pin 1 of the
Emulation Header).
5.1.1
RS-232 Serial Ports
Two RS-232 serial communication channels are provided on the dsPICDEM? 1.1 Plus
Development Board. One serial communication channel (DB9 connector J5/PORTB)
can be configured as an RS-232 or RS-485/RS-422 communication channel by setting
jumper J4 to the RX232/TX232 position. This jumper position connects the dsPIC DSC
UART channel 1 U1RX and U1TX pins to an RS-232 level-shifting IC (U3).
The serial port is configured as Data Communication Equipment (DCE), and can be
connected to a PC using a straight-through cable. If hardware handshaking is required,
inserting jumper J3 will connect CTS and RTS to port pins RD4 and RD5 on the dsPIC
DSC device. These pins can support CTS/RTS through a bit-bang control approach.
Both pins are connected to IC U3.
Setting jumper J4 to the TX485/RX485 position configures the dsPIC DSC UART
channel 1 U1RX and U1TX pins for a RS-485/RS-422 communication channel.
The second serial communication channel (DB9 connector J2/PORT A) is connected
to the dsPIC DSC UART channel 2 U2RX and U2TX pins via RS-232 level-shifting IC
(U1). This channel is a dedicated RS-232 serial communication channel. Hardware
flow control is not provided.
The schematic of these ports is shown in Figure A-5: “dsPICDEM? 1.1 Plus Devel-
opment Board Schematic (Sheet 4 of 5)”
5.1.2
CAN Port
The CAN RXD and TXD lines of the SN65HVD230DR are connected to the dsPIC DSC
CANRX and CANTX pins. CAN bus signals (CANH and CANL) are available on DB9
connector J20. The CANH and CANL bus can be locally terminated with a 120 ohm
resistor by inserting jumper, J18.
The schematic of the CAN port is shown in Figure A-5: “dsPICDEM? 1.1 Plus Devel-
opment Board Schematic (Sheet 4 of 5)” .
DS70099D-page 62
? 2006 Microchip Technology Inc.
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
DM330012 KIT USB STARTER FOR DSPIC33E
DM330013 MICROSTICK DSPIC33F/PIC24H BOARD
DNET1 SURGE SUPPRESSOR ETHERNET RJ45
DR-8094 RACK DOUBLE 84"X20.25"X36" BLK
DR-IAC5E INPUT MODULE AC 5VDC
DRIDC24A INPUT MODULE DC 34MA 24VDC
DRODC24 OUTPUT MODULE DC 13MA 24VDC
DRR-40A MODULE REDUNDANCY 40A DIN RAIL
相关代理商/技术参数
DM300027 功能描述:开发板和工具包 - PIC / DSPIC 16-bit Starter Demo Board RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
DM-3-000-K 制造商:PacTec 功能描述:Case, Plastic; ABS; Black; 11.46 in.; 3.38 in.; 10.4 in.; UL 94-HB Rated 制造商:PacTec 功能描述:ENCLOSURE, DESKTOP, PLASTIC, BLACK; Enclosure Type:Desktop; Enclosure Material:Plastic; Body Color:Black; External Height - Imperial:3.38"; External Height - Metric:86mm; External Width - Imperial:10.4"; External Width - Metric:264mm;RoHS Compliant: Yes
DM-300-C 制造商:Greenlee Textron Inc 功能描述:DMM 1000V RMS
DM-301 制造商:Labfacility Limited 功能描述:SENSOR PT100 THIN FILM 2X2.3MM CL B 制造商:LABFACILITY 功能描述:SENSOR, PT100, THIN FILM, 2X2.3MM, CL B 制造商:LABFACILITY 功能描述:TEMPERATURE RTD SENSOR, -70C to +500C, 100 OHM; Sensing Temperature Min:-70C; Sensing Temperature Max:+500C; Resistance:100ohm; Sensor Terminals:Through Hole; Temperature Sensing Range:-70C to +500C ;RoHS Compliant: Yes
DM30103J 制造商:ELMCO 功能描述:
DM30113G 制造商:n/a 功能描述:DM30X311 S7C8B
DM30-113G 制造商:n/a 功能描述:DM30X311 S7C8B
DM30133J 制造商:n/a 功能描述:DM30X313 S7C8B
    • 我
    • 采购
    • 搜索
    • 会员